Home / Water Quality Report
2026 Phoenix Metro Water Quality Report
A plain-English summary of the latest annual drinking water reports from Phoenix-area utilities: hardness, total dissolved solids, disinfectant, arsenic, nitrate and PFAS, with a link to every original source. Compiled by Happy Tap from public utility data.
Key findings
- Hard everywhere it’s reported. Every utility here that publishes hardness reports very hard water, from about 10 to 17.6 grains per gallon.
- Chlorine, not chloramine. Every utility that names its disinfectant uses chlorine.
- TDS often above the taste guideline. Phoenix and Scottsdale both report TDS ranges that reach above the EPA’s 500 mg/L secondary guideline.
- Arsenic and nitrate under limits, but present. Highest reported arsenic ranges from 6.3 ppb (Scottsdale) to 9.5 ppb (Chandler), against a 10 ppb limit.
- PFAS varies by location. Results range from not detected to above the new 4 ppt limit at specific wells or entry points (Tempe, Gilbert, Goodyear), with utilities planning treatment.
Last reviewed: September 30, 2026. Data come from each utility’s most recent published report or official water quality page.
City-by-city comparison
| City | Utility | Water sources | Disinfectant | Hardness | TDS | Arsenic (limit 10 ppb) | Nitrate (limit 10 ppm) | PFAS | Source |
|---|---|---|---|---|---|---|---|---|---|
| Phoenix | City of Phoenix | Salt, Verde & Colorado rivers; ~20 wells | Chlorine | 172–302 ppm (10–17.6 gpg) | 464–716 ppm | ND–8.5 ppb | ND–4.5 ppm | UCMR 5: low-level PFBS & PFBA; PFOA/PFOS not listed | 2025 report |
| Scottsdale | City of Scottsdale | CAP 71%, SRP 13%, groundwater 8%, recycled 8% | Chlorine | 215–290 ppm (13–17 gpg) by zone | 325–710 ppm | 1.2–6.3 ppb | ND–6.4 ppm | PFBS ND–0.0032 ppb; PFOA/PFOS not listed | 2026 report (2025 data) |
| Mesa | City of Mesa | SRP, CAP & wells (varies by zone) | Chlorine + chlorine dioxide | Avg ~12 gpg (City Zone), ~16 gpg (Eastern/Southern) | See report | Highest 8.8 ppb | Highest 8.99 ppm | UCMR 5 completed; values not in report | 2025 report |
| Chandler | City of Chandler | SRP, CAP & 27 wells | Chlorine | 173–288 ppm (10.1–16.8 gpg) | Not listed | 1.40–9.50 ppb | 0.26–6.8 ppm | PFOA avg 0.718 ppt, PFOS avg 0.607 ppt (limit 4) | 2025 report |
| Paradise Valley (EPCOR) | EPCOR Paradise Valley district* | Groundwater + Phoenix 24th St. plant interconnect | Chlorine | ~12 gpg (2022 sample) | 430–490 ppm (2022) | 7.1–7.8 ppb | Highest 6.74 ppm | PFOA up to 2.27 (limit 4.0); others ND | 2025 report |
| Tempe | City of Tempe | SRP & CAP | Chlorine | See report | See report | See report | See report | 2025: averages ND; highest PFOS 33 ppt, PFOA 9.9 ppt | City PFAS page |
| Gilbert | Town of Gilbert | SRP, CAP & 17 wells | Ozone + chlorine | See report | See report | See report | See report | 2023 sampling: Well 7 PFOA 3.9 / PFOS 5.6 ppt; well taken offline | Town water quality page |
| Glendale | City of Glendale | SRP 55%, CAP 41%, groundwater 4% | Chlorine | See report | See report | See report | See report | UCMR 5 sampled 2024–25; see report | 2025 report |
ND = not detected. ppm = parts per million (mg/L); ppb = parts per billion; ppt = parts per trillion; gpg = grains per gallon. Values are ranges or highest results exactly as each utility reports them, for the most recent report available. Scroll the table sideways on a phone. *Paradise Valley homes may instead be served by Phoenix, Scottsdale or Berneil Water Company depending on address (Town of Paradise Valley). Peoria, Queen Creek, Goodyear and Surprise are listed below with links to their official reports.
City details and sources
Phoenix
- Sources: Salt, Verde and Colorado River water plus about 20 groundwater wells; 97–99% surface water.
- Disinfectant: chlorine (highest running annual average 0.84 ppm).
- Hardness: 172–302 ppm (10–17.6 grains per gallon). TDS: 464–716 ppm. Sodium: 91–183 ppm.
- Arsenic: ND–8.5 ppb (highest annual average 7). Nitrate: ND–4.5 ppm. Fluoride: 0.3–1.1 ppm; the city adds a small amount of fluoride.
- PFAS (UCMR 5): PFBS 0.007–0.016 ppb and PFBA 0.005–0.006 ppb; PFOA and PFOS are not listed as detected.
- Notes: the report describes a late-summer and fall “musty” taste from canal algae, and one monitoring lapse in May 2025 (359 of 360 routine samples); no contaminant-level violation is listed.
Scottsdale
- Sources (2025): Central Arizona Project 71%, Salt River Project 13%, groundwater 8%, recycled water 8%.
- Disinfectant: chlorine. Treatment plants use granular activated carbon for taste and odor.
- Hardness by area: south of Indian School Rd 13–15 gpg; Indian School to Chaparral Rd 13–17 gpg; north of Chaparral Rd 13–17 gpg.
- TDS: 325–710 ppm. Sodium: 48–140 ppm.
- Arsenic: 1.2–6.3 ppb (system average 3.9). Nitrate: ND–6.4 ppm. Fluoride: ND–0.5 ppm.
- PFAS: PFBS ND–0.0032 ppb; PFOA and PFOS not listed. The report notes incomplete monitoring for the herbicide 2,4-D in mid-2025; follow-up testing found none.
Source: City of Scottsdale 2026 Water Quality Report (2025 data)
Mesa
- Sources: SRP surface water, Colorado River water via CAP and groundwater; the blend differs between the City Zone and the Eastern and Southern Zones.
- Disinfectant: chlorine and chlorine dioxide.
- Hardness: averages about 12 gpg in the City Zone and about 16 gpg in the Eastern and Southern Zones; the report suggests setting softeners at 16 gpg.
- Arsenic: highest 8.8 ppb. Nitrate: highest 8.99 ppm. Mesa adds fluoride.
- PFAS: Mesa completed UCMR 5 monitoring; the report refers readers to EPA data rather than listing values.
Chandler
- Sources: Salt, Verde and Colorado River water (Pecos plant), the Santan Vista plant shared with Gilbert, and 27 city wells.
- Disinfectant: chlorine (running annual average 0.93 ppm).
- Hardness: 173–288 ppm (10.1–16.8 gpg). Sodium: 100–280 ppm.
- Arsenic: 1.40–9.50 ppb. Nitrate: 0.26–6.8 ppm. Fluoride: 0.15–1.5 ppm.
- PFAS: PFOA average 0.718 ppt (up to 1.31), PFOS average 0.607 ppt (up to 1.14), against a federal limit of 4 ppt; no violation.
Gilbert
- Sources: SRP and CAP surface water plus groundwater from 17 wells.
- Treatment: ozonation and chlorination at the town’s treatment plants.
- PFAS: November 2023 sampling found PFOA 3.9 ppt and PFOS 5.6 ppt at Well 7, which the town took offline as a precaution; the town says detections were limited to a few sites.
- Hardness, TDS, arsenic and nitrate: see the town’s annual report (we’re adding these values).
Source: Town of Gilbert Water Quality
Tempe
- Sources: SRP and CAP surface water.
- Disinfectant: chlorine, kept closer to 1 mg/L.
- Fluoride: about 0.2–0.4 ppm naturally; the city adds fluoride to reach 0.7 ppm.
- PFAS (2025): averages not detected; highest results PFOS 33 ppt, PFOA 9.9 ppt and PFHxS 11 ppt. The city says it remains in compliance and is preparing treatment ahead of the federal deadline.
- The city notes a seasonal musty or earthy taste from algae.
Source: City of Tempe PFAS, Water FAQ, annual reports
Glendale
- Sources (2025): SRP 55%, CAP 41%, groundwater 4%.
- Disinfectant: chlorine; the city uses activated carbon when canal algae cause a late-summer musty taste or odor.
- UCMR 5 PFAS and lithium sampling ran June 2024 to March 2025; see the report for results.
Paradise Valley
- Paradise Valley has no town water utility. Depending on address, homes are served by EPCOR, the City of Phoenix, the City of Scottsdale or Berneil Water Company.
- EPCOR Paradise Valley district: groundwater plus an interconnect with Phoenix’s 24th Street treatment plant; chlorine disinfection.
- Hardness about 12 gpg and TDS 430–490 ppm (2022 samples). Arsenic 7.1–7.8 ppb (EPCOR runs an arsenic removal facility). Nitrate highest 6.74 ppm.
- PFAS: PFOA up to 2.27 against a 4.0 limit; PFOS, PFHxS, PFNA and HFPO-DA not detected.
Source: EPCOR Paradise Valley 2025 Water Quality Report, Town of Paradise Valley water companies
Goodyear
- PFAS: the city says one entry point is above the 4 ppt federal limit and treatment is planned before the 2031 compliance deadline.
Source: City of Goodyear PFAS status
Peoria
- See the city’s official water quality reports; we’re adding Peoria’s values.
Queen Creek
- Groundwater from town wells, including recovered surface water. Sodium 74–120 ppm (average 91 ppm).
Surprise
- Some Surprise homes are served by the City and others by EPCOR. Check your water bill for your provider.
What the numbers mean
Is Phoenix tap water hard?
Yes. Every Phoenix-area utility in this report that publishes hardness reports very hard water, roughly 10 to 17.6 grains per gallon.
The U.S. Geological Survey classifies water above 180 mg/L (about 10.5 gpg) as very hard (USGS). Hardness is calcium and magnesium; it causes white spots and scale but isn’t a health standard. A water softener is the standard way to reduce it.
Is Phoenix tap water safe to drink?
Phoenix’s 2025 report lists no maximum contaminant level (MCL) violations.
The report does note one monitoring lapse in May 2025. Many Valley homeowners still treat their water for taste, hardness, or to further reduce substances like arsenic, nitrate or PFAS that are present below federal limits. Your utility’s annual report is the authoritative source for your address.
What is TDS?
Total dissolved solids (TDS) is the total amount of minerals, salts and other substances dissolved in water.
The EPA’s non-enforceable secondary guideline for TDS is 500 mg/L, based on taste and appearance (EPA). Phoenix reports 464–716 ppm and Scottsdale 325–710 ppm. Reverse osmosis is the common way to lower TDS in drinking water.
Do Phoenix-area utilities use chlorine or chloramine?
Every utility in this report that names its disinfectant uses chlorine; none reported chloramine.
Mesa also uses chlorine dioxide, and Gilbert uses ozonation before chlorine. Chlorine is what causes the “pool” taste some people notice. Activated carbon filtration reduces chlorine taste and odor, which is why whole-home systems pair carbon with softening.
What are PFAS, and what is the limit?
PFAS are a large group of long-lasting man-made chemicals. In 2024 the EPA set limits of 4 parts per trillion for PFOA and PFOS.
Utilities have until the compliance deadline the EPA has set (cited by Valley utilities as 2031) to meet the limits (EPA). Results vary widely by well and treatment plant, from not detected to above 4 ppt at specific locations. The EPA notes that reverse osmosis is among the most effective treatment technologies for PFAS (EPA research).
What is an MCL?
A maximum contaminant level (MCL) is the highest level of a substance allowed in public drinking water under federal law.
Arsenic’s MCL is 10 ppb and nitrate’s is 10 ppm. Several Valley utilities report arsenic between 6 and 9.5 ppb at their highest points: under the limit, but not zero.
Which treatment addresses which issue?
This table maps common concerns to the type of treatment designed for them. Results always depend on the specific system and your water.
| If your concern is… | Treatment type that addresses it |
|---|---|
| Hardness: spots, scale, buildup | Water softener (ion exchange) |
| Chlorine taste and odor | Activated carbon, as in whole-home filtration |
| High TDS or salty taste in drinking water | Reverse osmosis at the kitchen sink |
| Arsenic, nitrate, fluoride or PFAS in drinking water | Reverse osmosis can reduce these; check a system’s certified performance data for each one |
| Private well water | Start with a certified lab test (EPA guidance), then treat what the results show |
Methodology
We read each utility’s most recent annual water quality report (Consumer Confidence Report) or official water quality page and recorded values exactly as published, with units. We did not estimate missing values. Where a report could not be accessed or its tables were not readable, we link to the source and mark the value “see report”. Water quality varies by neighborhood, season and source blend, so your own tap may differ. Spotted an update? Call (623) 263-4754.
Want to know what’s in your own tap?
A free in-home water test shows your hardness and what your city report means for your home.
