Free in-home water test for Phoenix Valley homes. Schedule yours today!

Home / Water Systems / Standard Softener + Filtration

Standard whole-home water softener and filtration system.

Our most popular system: a 48,000-grain water softener and coconut shell carbon filter in a single tank. It handles the two problems almost every Phoenix-area home has, hard water and chlorine taste, at every tap in the house.

Single-tank softener and carbon filtration system next to a tankless water heater

Standard Softener + Filtration: quick answers

What does it do?

It softens hard water and reduces chlorine taste and odor for the whole house, using one tank and one valve.

Water passes through a layer of coconut shell carbon, then through softening resin that exchanges calcium and magnesium for sodium. A salt tank beside it recharges the resin automatically.

What size home is it for?

Most 3–4 bedroom Valley homes on city water with up to three bathrooms.

Capacity is about how long the system runs between regenerations. If your home is larger, your household is bigger, or your water tests very hard, the XL or Dual Tank may fit better.

How long between regenerations in Phoenix?

Roughly 10 days for a family of four, based on the math below. Your water test gives the real number.

Phoenix reports hardness of 10 to 17.6 grains per gallon. At 15 grains per gallon, a four-person household using about 75 gallons per person per day needs about 4,500 grains of softening a day. A 48,000-grain rating covers about 10 days of that. Real-world capacity depends on the salt setting, so the valve meters actual use and regenerates on demand.

Standard specifications

Softening capacity48,000 grains
Softening resin75 lbs ResinTech CG10, 10% crosslinked, made in the USA
Carbon15 lbs granular activated coconut shell carbon
Support bedNSF-certified gravel to prevent channeling
Media tank12″ x 52″ Enpress fiberglass
Brine (salt) tank15″ x 35″ square
Control valveProValve with ceramic discs and 72-hour memory backup
Valve flow rate28 gallons per minute
Service flow27 gallons per minute at a 15 psi pressure drop
RegenerationUpflow, counter-current, demand-initiated (meters actual water use)
Backwash flow3.0 gallons per minute
Bypass1″ full-flow bypass valve, included
Connections1″ NPT; 1.25″ high-flow distributor tube
Operating pressure30–125 psi
Water temperature40–110°F
Power120V outlet with 12V transformer

Specifications from the manufacturer’s product sheet. Specifications can change; your quote lists the exact equipment.

Who it’s for

  • City water homes with spots, scale and chlorine taste
  • Most 3–4 bedroom homes, up to about three bathrooms
  • Homeowners who want one tank instead of two

What it won’t do

  • It doesn’t purify drinking water. For that, add reverse osmosis at the kitchen sink.
  • It doesn’t remove dissolved solids, nitrate or arsenic.
  • It adds a small amount of sodium. Potassium chloride can be used instead of salt.

Certified components

  • Control valve: certified to NSF/ANSI 44
  • Fiberglass mineral tank (Enpress): certified to NSF/ANSI 44 and 61
  • Coconut shell carbon (Jacobi): certified to NSF/ANSI 61
  • Softening resin: ResinTech CG10, 10% crosslinked

These are certifications of individual components for material safety and softener performance. They are not a contaminant-reduction certification for the complete system.

Warranty

Media tanks, storage tanks and brine tankLifetime
Ceramic valve discs and system dry partsLifetime
Control valve body and circuit board5 years
Filtration media (resin and carbon)5 years

Coverage applies to the original purchaser under normal operating conditions. Read the full warranty →

Price

Most Happy Tap systems fall between $2,950 and $4,950, depending on the setup: city or well water, the size of your home and household, and your home’s setup. Your quote is one written number before any work starts.

Frequently asked questions

Is the Standard system big enough for my house?

For most 3–4 bedroom homes on city water, yes. We confirm it with your hardness reading and household size during the free water test.

How much salt does it use?

It depends on your hardness and water use. The valve only regenerates when your metered use calls for it, which avoids wasting salt. Happy Tap Care Plan members get salt delivered and loaded.

Does it need a drain and an outlet?

Yes. Regeneration rinse water goes to a drain, and the valve runs on a standard outlet through a 12V transformer.

What happens if the power goes out?

The valve keeps its settings with a 72-hour memory backup, and water still flows through the system.

Not sure which one fits?

We test your water at your sink, explain the numbers, and size the system to your home. Free, and no pressure.